Product Banner
Product Banner

Cross beam for multiple floodlights

Cross beam · 6 floodlights
Cross beam · 6 floodlights
Options
  • RAL - RAL finish
  • CUS - Custom finish
  • MGU - Marine grade undercoat

Downloads

  • Spec sheet
  • Submittal drawing (DXF)
  • Submittal drawing (PDF)
  • Installation instructions
  • Download all
  • Estimated Lead-Time

Cross beam for multiple floodlights
Cross beam · 6 floodlights

Cross beams can be mounted on walls, support structures, and under ceilings. When installed on the ground, they can either be mounted on a foundation or anchorage unit. Anchorage units must be ordered separately. Yoke mounted floodlights are attached to rotatable clamping plates which can be adjusted in 90° increments and have a 1/2" threaded cord seal for cable entry. Floodlights can be rotated a full 360° on the clamping plate for precise aiming. The cross beam is equipped with six (6) exit cable glands to cleanly route cables out of the cross beam. Removable, fully gasketed, cover plates are provided for access inside the cross beam. Not compatible with 1/2" I.P.S. nipple mount floodlights.

All BEGA standard finishes are matte, textured powder coat with minimum 3 mil thickness. BEGA Unidure® finish provides superior fade protection in Black, Bronze, and Silver. BEGA standard White is a super durable polyester powder. Optionally available RAL and custom color finishes provided in either polyester powder or liquid paint.